230V 5.5Hp Air Compressor 4500psi for Paintball PCP Diving Bottle Filling 2 Port

Description

230 V 5.5 Hp Air Compressor 4500 psi for Paintball PCP Diving Bottle Filling 2 Ports
Charging Rate: 250L/min; 9cfm
Suction pressure: atmosphere
Working pressure: 30MPa/ 300bar/ 4500psi
Max Working pressure: 33MPa/ 330bar/ 4950psi
Media: air
No.of stage and cylinder: 3
Electric motor: 5.5kw/7.5hp, 380v/50hz, 220v/60hz
Cooling: air cooled
Driven: belt driven by electric motor
Shout down：Automatic stop by pressure switch
Pressure indicate：Gauge
Protection：Safety valve in internal and final stage
Filtration：Oil separator and filter
Moisture drain: by manual / Automatically drain (optional)
Lubricant: ISO grade N100/150 SAE 40/50 synthetic reciprocate compressor oil
Operation Temperature: 5-40℃ environment temperature
Dimension：39*21.6*25.5 inch
Weight：330 lbs
Noise：Less than 83 dB(A)
Discharge port: 2
This series are high pressure air compressor. It compresses atmosphere air go to pressure 20/30Mpa, 3000/4500psi, after be purified and separated by the filter and separator.
It discharges clean air accords to GB18435-2001 breathing air standard.
It is widely be used for breathing of diving and firefighting; paintball PCP shooting and other high pressure filed industries by its reliability, durability and portability.
￭ Check the electric voltage in nameplate is same as your local electric supply
￭ Check the lubricate oil has been put in before running
￭ Increase rated pressure setting is forbidden
￭ There is potential danger of pipe burst or connect fitting blow off under high pressure,  please avoid body too near compressor when it running
￭ if there are no auto stop function, don't leave compressor until it reach rated pressure and shut down it by manual
Notice:
1. The bottle filling of the air compressor must be greater than the pressure of the gas cylinder to fill the bottle! 【Air Compressor Pressure>Cylinder Pressure】
2. Suggestion for bottle filling: ≤ 12 L
3. Use of gas cylinder: Fire fighting, diving breathing ; Bottle filling experiment
4. Recommended operating time of the machine (machine operating load range): Within 1 hour
5. Estimated filling time:
Recommendations for filling 12L gas cylinders:
1) The cylinder pressure is 200bar, and the estimated time is 10 minutes
2) The cylinder pressure is 300bar, and the estimated time is 15 minutes
On Aug-09-21 at 00:02:06 PDT, seller added the following information: