INLretro Dumper-Programmer Case (Self Designed and Printed)

Description

Custom made case for INLretro Dumper-Programmer. The mounting screws to the unit, (5x #6 x 1/2 inch) are included. Each order is made when purchased, typically ship the next day, depending on volume. Programmer not included, they can be purchased from
http://www.infiniteneslives.com/inlretro.php
The board does not have a screw hole on the bottom right corner, causing the board to not be 100% flush with the bottom of the case (it's minor, see photo for details). The design of the PCB does not allow for a screw at that spot. Adjustments were made to accommodate the solder joints and screws for the components in that area.
At this time there are 6 different colors - grey, red, white, green, black and purple.
Another option is the 'mistake option' which is an error from the 3d print but it does not effect the functionality of the device. It could be something simple like the nozzle was too close and left a mark when printing the top layer. Anything substantial has been disposed. The mistake option does not come with the mounting screws.
Please remember you are not buying the device from me, only the case for the device.
USA shipping only. Any questions, please feel free to ask. Thanks.